Temperature controlled transport: what we arrange
Temperature controlled transport keeps chilled, frozen and other temperature-sensitive goods within a fixed range from loading to delivery. We arrange it with carriers by sea, by road and by air: reefer containers through the ports of Antwerp and Rotterdam, refrigerated trucks across Europe and air freight when time matters more than cost.
Your contact plans the transport, books the right equipment, passes your temperature instructions to every carrier and takes care of the customs clearance. You give the instructions once. We make sure they reach everyone who handles your goods.
Temperature ranges and typical goods
The required temperature always comes from the product owner, not from the forwarder or the carrier. These are the ranges that are most common in transport:
| Range | Common name | Typical goods | Where it comes from |
|---|---|---|---|
| -18 °C or colder | Frozen | Frozen meat, fish, vegetables, ice cream | EU rule for quick-frozen food: -18 °C or lower at all points, short rises of up to 3 °C allowed during transport |
| Just above 0 °C to about +7 °C, product specific | Chilled food | Fresh meat, dairy, fish | Product specification. The ATP agreement sets maximums for some foods, for instance +6 °C for raw milk and +7 °C for red meat |
| +2 °C to +8 °C | Refrigerated (pharma) | Vaccines and many other medicines | Standard EU storage statement “Store in a refrigerator (2 °C to 8 °C)” |
| +15 °C to +25 °C | Controlled room temperature | Many medicines | Range commonly used in pharma transport |
| Product specific, often with ventilation and humidity control | Fresh produce | Fruit, vegetables, flowers | Grower or importer specification |
Some goods also need protection from heat or from cold in winter, so “temperature controlled” does not always mean cooling.
Reefer containers for sea freight
How a reefer container works
A reefer is an insulated container with its own refrigeration unit. It cools or heats the air and blows it through the cargo to hold the temperature you booked, called the set point. Depending on the model, the unit can also let in fresh air, lower the humidity or control the atmosphere inside the box, which slows down the ripening of fruit. Dimensions and the temperature ranges of common models are in our container guide.
One point is often misunderstood: a reefer is built to hold a temperature, not to cool down warm cargo. Hapag-Lloyd, for example, advises shippers to pre-cool chilled cargo and pre-freeze frozen cargo before stuffing. It also advises never to set the unit lower than the carrying temperature, because a lower set point does not speed up cooling and can damage the goods.
What you tell us at booking
Before a carrier releases a reefer, it needs your settings. These are the details carriers ask for:
- Set point in °C
- Commodity description
- Fresh-air ventilation in m³ per hour (frozen cargo is normally shipped with ventilation closed)
- Humidity setting in %, if needed
- Controlled atmosphere, if your goods need it
- Place, date and time of stuffing
We pass these settings to the carrier in writing and check them against the booking confirmation.
Pre-trip inspection and power supply
Each reefer gets a pre-trip inspection (PTI) before it is released. The carrier tests the refrigeration unit and the box and prepares it for your settings. After stuffing, the reefer needs power all the time: from a plug at the terminal, on board the vessel and from a generator set (genset) or the truck during road transport. Any gap in power is a risk, which is why we plan the road legs to and from the terminal with care. More on the sea leg itself on our sea freight page.
Refrigerated trucks and the ATP agreement
For transport within Europe and for the legs to and from the port, temperature controlled goods travel in refrigerated trailers or in reefer containers on a chassis. We book these with carriers as part of our road freight service.
For food, the ATP agreement matters. ATP stands for the Agreement on the International Carriage of Perishable Foodstuffs and on the Special Equipment to be used for such Carriage, signed in Geneva in 1970. It has 52 parties, including Belgium, the Netherlands, Luxembourg and Germany. ATP sets standards for insulated and refrigerated equipment and maximum temperatures for frozen and certain chilled foods. Equipment that meets the standard receives an ATP certificate. In the Netherlands, for example, the certificate for new equipment is valid for six years and must then be renewed every three years.
ATP applies to international transport of perishable foodstuffs. Fresh fruit and vegetables are not covered. Medicines fall under other rules (see GDP below).
Air freight for perishables and pharmaceuticals
When goods have a short shelf life or are urgent, air freight is often the only option. Fresh flowers, fish and high-value medicines are typical examples.
The air cargo industry works with standards from IATA, the airline association. The Temperature Control Regulations (TCR) cover healthcare products and the Perishable Cargo Regulations (PCR) cover perishables. Based on these, IATA runs two certification programmes: CEIV Pharma for pharmaceutical logistics and CEIV Fresh for perishables. Airlines, ground handlers and other companies in the chain can be certified. If your quality requirements call for CEIV certified partners, tell us at the quote stage so we can take this into account when we select the route.
Pharmaceuticals and the EU GDP guidelines
Medicines for human use in the EU are distributed under the Guidelines on Good Distribution Practice (GDP), published by the European Commission on 5 November 2013 (2013/C 343/01). For transport, they say that the supplying wholesale distributor is responsible for keeping temperature conditions within acceptable limits and should plan transport on a risk-based approach. In practice this means qualified equipment or packaging, temperature monitoring and a clear procedure when a deviation occurs.
If your goods fall under GDP, your quality team defines the requirements. Share them with us before the first shipment. Your contact then discusses with you which route, equipment and carriers meet them. You also agree how temperature records are handed over at the end of the transport.
Temperature monitoring and data loggers
A reefer unit records the temperature in the container during the trip. Many carriers also offer remote monitoring of temperature, humidity and power status. For refrigerated trucks and air freight, the equipment or the packaging records the data in a similar way.
Many shippers add their own independent data logger to the cargo. It gives you a record that does not depend on the carrier. Agree in advance who places the logger, where in the load it sits and who reads it out at delivery. If something goes wrong, these records are the basis for any claim.
Your part as the shipper
Temperature controlled transport only works when the cargo is ready for it. As the shipper or the supplier on your side, you are responsible for:
- Pre-cooling or pre-freezing the cargo to the carrying temperature before loading
- A clear set point in writing, in °C, plus ventilation and humidity where needed
- Suitable packaging, for example cartons that let cold air pass through for fresh produce or validated insulated packaging for medicines
- Correct loading: cargo evenly spread, the floor covered and nothing stowed above the red load line in a reefer, so air can circulate. Our guide to pallets and cargo securing has the basics
- The right documents, such as health or phytosanitary certificates for food and plants, next to the usual shipping documents
Which party pays for and arranges each leg depends on the agreed Incoterms.
Importing perishables through Antwerp and Rotterdam
Both ports have a large reefer business. According to the Port of Antwerp-Bruges, the port handled 1,170,394 TEU of reefer containers in 2025, its highest volume so far. Around 90 % of its reefer imports are fresh products such as fruit, vegetables, meat and fish. The Port of Rotterdam states that its container terminals have a total of 18,500 reefer connections.
Food and plant imports from outside the EU often need more than a customs declaration. Products of animal origin, certain food of non-animal origin and many plants and plant products must enter the EU through a border control post (BCP). There, the food safety authority checks the documents and, where required, the goods themselves. In Belgium this is the FASFC, with a border control post in the port of Antwerp. In the Netherlands it is the NVWA, with a border control post in the port of Rotterdam.
Each consignment must be announced in advance with a Common Health Entry Document (CHED), at least one working day before it arrives. Customs release depends on the outcome of these checks. We coordinate the CHED, the customs clearance and the onward transport, so a container does not wait at the terminal while its paperwork catches up.
Sea, road or air: which mode fits your goods
| Reefer container (sea) | Refrigerated truck (road) | Air freight | |
|---|---|---|---|
| Best for | Larger volumes over long distances | Transport within Europe and to and from the port | Short shelf life, urgent or high-value goods |
| Shelf life needed | Long enough for the full sailing plus port time | Long enough for the road transit | Can be short |
| Cost | Lowest per kg over long distances | Depends on distance and load | Highest per kg |
| Temperature control | Reefer unit with power at all times | Trailer unit or reefer on a chassis | Active containers or passive packaging, plus handling at the airports |
As a rule of thumb: if the shelf life comfortably covers the sea transit, a reefer container is usually the most economical choice. If it does not or the goods are worth more than the extra freight, air is the safer option. Your contact compares both for your shipment.
Common mistakes in the cold chain
- Loading cargo that is warmer than the set point and expecting the reefer to cool it down
- Setting the reefer lower than the carrying temperature to cool faster
- Mixing up °C and °F
- Giving the set point by phone only
- Leaving ventilation open for frozen cargo
- Closing ventilation for fresh produce that needs air
- Stowing above the load line or blocking the airflow with wrapping or cartons
- Announcing a food or plant import too late at the border control post
- No independent logger and no agreement on who reads out the data
What we need for your quote
- Commodity, HS code if known and the required temperature range from the product owner
- Ventilation, humidity or atmosphere settings, if any
- Pick-up and delivery address or port
- Number of pallets or packages, dimensions and weight
- Packaging type
- Ready date and latest delivery date
- Whether health or phytosanitary certificates apply
- Whether the goods fall under GDP or other quality requirements
- Preferred Incoterm
Request a quote for temperature controlled transport and your contact comes back to you with the options.
Why Destinex for temperature controlled transport
One personal contact
The same person plans your shipment and passes your temperature instructions to every carrier.
Available 24/7
Questions about temperature-sensitive cargo do not wait until the next working day.
Updates before you ask
Your contact keeps you informed at every step, so you do not have to chase status.
Antwerp, Rotterdam and customs in one hand
Transport through both ports and the customs clearance are arranged by one partner.