This guide brings the rules together for shippers in Belgium, the Netherlands and Luxembourg who move goods via Antwerp or Rotterdam. Every number comes from the body that sets it: EPAL for Euro pallets, the IPPC for ISPM 15, the IMO/ILO/UNECE CTU Code for packing containers, SOLAS for VGM and EU and national law for road transport.
Pallet types and dimensions
The EPAL Euro pallet (EUR 1)
The Euro pallet is the standard load carrier in European road freight. Only pallets made by EPAL licensees and marked “EPAL” in an oval belong to the open EPAL exchange pool. Other pallets with the same footprint exist but are not EPAL pallets.
| EPAL Euro pallet (EPAL 1) | Value according to EPAL |
|---|---|
| Dimensions | 1,200 x 800 x 144 mm |
| Weight | approx. 25 kg |
| Safe working load | 1,500 kg |
| Stacking | bottom pallet in a stack of laden pallets max. 5,500 kg, on a solid, even surface |
| Construction | 11 boards, 9 blocks, 78 nails |
| Entry | 4-way (forklift and pallet truck) |
| Treatment | heat treated (HT) under ISPM 15 |
Two points are often misquoted online. First, the 1,500 kg figure is the safe working load of the pallet itself. EPAL does not publish a general racking value, so the load you may put on a pallet in a rack depends on the rack and how the pallet is supported. Ask your racking supplier. Second, many pages still quote 4,000 kg as the “static” or stacking load. EPAL’s current data sheet (May 2025) gives 5,500 kg for the bottom pallet of a stack on a solid, even floor.
A genuine EPAL Euro pallet carries the EPAL oval on the left corner block. The middle block shows the IPPC mark with country code, IPPC number and “HT” plus the licence number and the production year and month. One of the middle blocks also has an EPAL control staple. Newer pallets carry a QR code with a 9-character serial number on the right corner block. Repaired pallets have a repair nail in one of the middle blocks.
EPAL 2, EPAL 3 and half pallets
| EPAL load carrier | Dimensions (mm) | Weight | Safe working load | Bottom pallet in stack |
|---|---|---|---|---|
| EPAL 1 Euro pallet | 1,200 x 800 x 144 | approx. 25 kg | 1,500 kg | 5,500 kg |
| EPAL 2 | 1,200 x 1,000 x 162 | approx. 35 kg | 1,250 kg | 4,250 kg |
| EPAL 3 | 1,000 x 1,200 x 144 | approx. 30 kg | 1,500 kg | 4,500 kg |
| EPAL 6 half pallet | 800 x 600 x 144 | approx. 9.5 kg | 750 kg | 1,500 kg |
| EPAL 7 half pallet | 800 x 600 x 163 | approx. 9.5 kg | 500 kg | 1,500 kg |
EPAL 2 and EPAL 3 share the 1,200 x 1,000 mm footprint but differ in construction, height and weight. EPAL lists the EPAL 3 as 1,000 x 1,200 mm. Check which one your customer’s racking and conveyors expect.
ISO pallet sizes (ISO 6780)
The international standard ISO 6780:2003 lists six pallet footprints for intercontinental materials handling.
| ISO 6780 size (mm) | In inches | Mainly used in |
|---|---|---|
| 1,200 x 800 | 47.24 x 31.50 | Europe (Euro pallet footprint) |
| 1,200 x 1,000 | 47.24 x 39.37 | Europe, Asia |
| 1,219 x 1,016 | 48 x 40 | North America |
| 1,165 x 1,165 | 45.9 x 45.9 | Australia |
| 1,067 x 1,067 | 42 x 42 | North America, Europe, Asia |
| 1,100 x 1,100 | 43.3 x 43.3 | Asia |
US and UK pallets
The 48 x 40 inch pallet (1,219 x 1,016 mm) is widely used in North America and is often called the GMA pallet. It is about 2 cm longer and 22 cm wider than a Euro pallet, so you cannot simply swap one for the other in a load plan. For the UK and Ireland, ask your consignee which footprint their warehouse, racking and pallet network work with before you build the load.
Block pallets and stringer pallets
A block pallet stands on blocks, usually nine. A forklift can enter it from all four sides. The Euro pallet is a block pallet.
A stringer pallet rests on three or more long beams (stringers) under the deck boards. Forks enter from the two ends. Notched stringers allow limited entry from the sides. Stringer pallets are common in North America.
For mixed European distribution, block pallets are easier to handle because any forklift or pallet truck can take them from any side.
Plastic and presswood pallets
Plastic pallets are durable, easy to clean and do not rot. They usually cost more than wooden pallets and can deform under long-term heavy loads. Pallets made entirely of processed wood (presswood, plywood, OSB) and plastic pallets fall outside ISPM 15. This makes them a practical choice for exports to countries where you are unsure about wood packaging controls. Check the load rating with the manufacturer, because it differs by model.
ISPM 15: the HT mark on wooden pallets
What the mark means
ISPM 15 is the international standard of the International Plant Protection Convention (IPPC) for wood packaging in international trade. It applies to wood packaging made of raw wood, including pallets, crates, cases, cable drums and dunnage. It aims to stop pests such as the pinewood nematode and the Asian longhorn beetle from travelling with your shipment.
Compliant wood packaging is made of debarked wood, treated with an approved method and marked. The mark has four parts:
- the IPPC symbol on the left
- a two-letter ISO country code
- a producer or treatment provider code assigned by the national plant protection organisation
- the treatment code
| Code | Treatment | Requirement under ISPM 15 |
|---|---|---|
| HT | Heat treatment in a heat chamber | at least 56 °C for at least 30 continuous minutes throughout the wood, including the core |
| DH | Dielectric heating (microwave or radio waves) | at least 60 °C for 1 continuous minute throughout the wood, including the surface |
| MB | Methyl bromide fumigation | fumigation schedule under ISPM 15 |
| SF | Sulphuryl fluoride fumigation | fumigation schedule under ISPM 15 |
EPAL pallets are heat treated (HT). EPAL does not allow methyl bromide treatment.
When ISPM 15 applies
Wood packaging entering the EU from a non-EU country (except Switzerland) must be debarked, treated and carry the ISPM 15 mark. In Belgium the Federal Agency for the Safety of the Food Chain (FASFC) is the competent authority. Since December 2019, EU authorities carry out these checks on a risk basis.
The EU requirements do not apply to:
- wood of 6 mm thickness or less
- packaging made entirely of processed wood produced with glue, heat and pressure (plywood, OSB, veneer)
- wood packaging used in trade within the EU, except from areas where the pinewood nematode or Asian longhorn beetle is under containment or eradication
For exports, the destination country’s rules apply. ISPM 15 is applied worldwide, but check the requirements of your destination. Using HT-marked pallets and dunnage for every shipment leaving the EU is the simplest way to avoid problems.
Dunnage and repaired pallets
Dunnage (loose timber used to block or support cargo) counts as wood packaging. It must be treated and marked like a pallet. ISPM 15 warns that small offcuts without a complete mark should not be used as dunnage.
A marked pallet that has not been altered does not need re-treatment. If a pallet is repaired, use only treated wood. Otherwise each new component must be marked. A pallet that is rebuilt from components must be treated and marked again.
Pallet exchange in Europe
In European road freight, pallets are often exchanged: the driver delivers loaded Euro pallets and takes back the same number of empty exchangeable ones. Whether this happens is a commercial agreement between you, your carrier and your customer. Agree it in writing in the transport order and on the delivery note.
EPAL defines when a Euro pallet is no longer exchangeable, for example when:
- a board is missing
- a block is missing or split so that more than one nail shank is visible
- a twisted block protrudes more than 10 mm
- a board is broken across or diagonally
- the pallet is rotten, heavily splintered or so dirty that it could contaminate the goods
Such pallets must be repaired by an EPAL-licensed repairer before they go back into the pool. Plain “Euro-size” pallets without EPAL marks are not part of the EPAL pool.
How many pallets fit in a container or trailer
The figures below are calculated for one layer on the floor, using typical inside dimensions. Exact inside dimensions vary by container, so treat them as planning values. Weight usually limits you before space does with dense goods.
| Equipment (typical inside length x width) | Euro pallets 1,200 x 800 mm | Pallets 1,200 x 1,000 mm |
|---|---|---|
| 20’ standard container (approx. 5.90 x 2.35 m) | 11 | 9 |
| 40’ standard or high cube (approx. 12.03 x 2.35 m) | 24 (25 in theory) | 20 |
| 13.6 m semi-trailer (inside width at least 2.40 m) | 33 | 26 |
How the numbers work:
- 20’ with Euro pallets: one lane of 7 pallets turned crosswise (7 x 800 = 5,600 mm) next to one lane of 4 pallets lengthwise (4 x 1,200 = 4,800 mm). The two lanes need 1,200 + 800 = 2,000 mm of width.
- 40’ with Euro pallets: the same pattern gives 15 + 10 = 25 pallets, but uses 12,000 of about 12,030 mm. With any overhang, plan 24.
- 20’ with 1,200 x 1,000 mm pallets: 5 + 4 = 9. Ten pallets do not fit in one layer in a standard 2.35 m wide container, even though some websites claim so.
- 13.6 m trailer: 11 rows of 3 Euro pallets (3 x 800 = 2,400 mm wide, 11 x 1,200 = 13,200 mm long) give 33.
Pallet-wide containers are slightly wider inside and take more Euro pallets. See our container guide for dimensions and payloads per container type.
Container stuffing and weight distribution
Container stuffing means loading cargo into a container. The IMO/ILO/UNECE Code of Practice for Packing of Cargo Transport Units (CTU Code) is the international reference. It is not law in itself, but it is the benchmark for good practice. Carriers such as Hapag-Lloyd base their own loading guidelines on it.
Centre of gravity and the 60% rule
A container is lifted at its four corners by the terminal’s spreader. If the weight sits mostly at one end, the container tilts when lifted, which is dangerous for the crane, the crew and the cargo. The CTU Code (Annex 7, section 3.1.4) therefore says:
- the joint centre of gravity of the cargo should be close to the middle of the container’s length and width
- the eccentricity should not exceed 5% in general
- as a rule of thumb, no more than 60% of the cargo’s total mass should be in one half of the container’s length
- up to 10% eccentricity can be accepted in particular circumstances, because modern spreaders can compensate
Vertically, the centre of gravity should be below half the height of the cargo space. Across the width, it should be close to the centre line. If you cannot meet these conditions, mark the centre of gravity on the outside of the container and inform the carrier.
Example (hypothetical): you load 18,000 kg of cargo into a container. Under the 60% rule of thumb, no more than 18,000 x 0.6 = 10,800 kg should be in either half of the length.
Concentrated loads and floor limits
A container floor is designed to carry the full payload spread evenly over the whole floor. A heavy item on a small footprint puts much more pressure on a short section of floor than it was built for.
Carriers express this as maximum weight per running metre of resting length. The example below comes from Hapag-Lloyd’s weight distribution guideline for its own general purpose, open top and hard top containers. Other carriers’ equipment can have different limits, so always ask the carrier for heavy pieces.
| Hapag-Lloyd example | Per running metre | Resting length 2 m | Resting length 6 m |
|---|---|---|---|
| 20’ wooden floor | 4.8 t | 9.6 t | 28.8 t |
| 40’ wooden floor | 3 t | 6 t | 18 t |
| 20’ steel floor | 7.6 t | 15.2 t | max. payload reached from 4 m |
| 40’ steel floor | 6 t | 12 t | max. payload reached from 5 m |
Hapag-Lloyd allows you to extend the resting length with solid timber or steel beams, but by no more than 100 cm at each end of the load. The CTU Code also recommends spreading concentrated loads onto the container’s structural cross members and agreeing the beam arrangement with the container operator.
Example (hypothetical): a machine of 11 t rests on skids 2 m long in a 40’ wooden-floor container. At 3 t per metre, 2 m allows only 6 t. With load-spreading beams extending 1 m at each end, the resting length becomes 4 m and the limit 12 t. The load is then within this carrier’s limit, subject to the carrier’s approval of the bedding.
Walls, doors and lashing points
The CTU Code gives these design values for general purpose containers:
- side walls withstand a uniform load of 60% of the permitted payload
- the front wall and the doors withstand 40% of the payload
- floor lashing points have a maximum securing load (MSL) of at least 10 kN, many newer containers 20 kN
- lashing points on the top side rails have an MSL of at least 5 kN
Cargo that presses against the doors can fall out when they are opened. Block the last row with a timber gate or a strapping system so the doors carry no load.
Cargo securing methods
Forces you have to secure against
Cargo has to withstand accelerations during transport. The CTU Code and EU road rules express them as a fraction of the cargo’s weight (g).
| Mode | Lengthwise | Sideways |
|---|---|---|
| Road (EU Directive 2014/47/EU, CTU Code) | 0.8 g forward, 0.5 g backward | 0.5 g |
| Sea, area A (significant wave height up to 8 m) | 0.3 g | 0.5 g |
| Sea, area B (8 to 12 m) | 0.3 g | 0.7 g |
| Sea, area C (over 12 m) | 0.4 g | 0.8 g |
In practice: when a truck brakes hard, a 1,000 kg pallet pushes forward with a force equal to the weight of 800 kg. The CTU Code adds that the weight of the cargo and friction are not enough on their own, because vibrations make cargo move.
Blocking and bracing
Blocking means placing the cargo tightly against something solid: the container walls, other cargo or a timber construction. It is the most effective way to secure cargo in a container. Bracing means fixing timber struts or beams between the cargo and the container structure so the cargo cannot move in a given direction.
Typical blocking methods:
- loading pallets tight to the front wall and side walls
- filling gaps between pallets with dunnage or airbags
- building a timber fence or using a strap gate in front of the doors
Lashing
Lashing ties the cargo to the container’s lashing points with webbing straps, chains or wire ropes. Use lashing for cargo that cannot be blocked, such as machinery, vehicles or a partly filled container. Two points matter:
- the strength of the lashing point limits the whole system, so check the MSL of the container’s lashing rings
- the lashing equipment must be in good condition and suitable for the load. Damaged straps or chains have no reliable strength
For road transport, EN 12195-1 is the European standard for calculating the securing forces needed. The current text is EN 12195-1:2010 with its corrigendum of 2014.
Dunnage, airbags and friction mats
- Dunnage: timber, boards or other material used to fill gaps, support cargo or spread loads. Wooden dunnage in international transport must be ISPM 15 treated and marked.
- Airbags (dunnage bags): inflatable bags that fill voids between cargo units. Choose size and strength so that their permissible load exceeds the force they must hold. Do not reuse bags that cannot be safely reinflated.
- Friction mats (anti-slip mats): rubber or similar mats under the cargo increase friction. They reduce the securing effort needed but do not replace blocking or lashing. Unless the friction factor of your materials is verified, the CTU Code says to use no more than 0.3 in calculations.
Desiccants and container rain
“Container rain” is condensation that drips from the container roof onto the cargo. It happens when moisture from the cargo, packaging, pallets or dunnage evaporates in daytime heat and condenses on the cold steel at night or in colder sea areas.
The CTU Code (Annex 3) gives three useful thresholds for the air inside a closed container:
- below 100% relative humidity: no condensation
- below 75%: no mould growth
- below 40%: no corrosion
Dry dunnage, pallets and packaging still contain about 12% to 15% moisture. After you close the doors, they bring the air in the container to around 60% to 75% relative humidity. For sensitive cargo, the CTU Code recommends desiccants combined with sealed plastic wrapping. Desiccants generally fail if the cargo itself is hygroscopic and not “container-dry”, because they cannot absorb enough moisture. Cardboard is particularly vulnerable: between 40% and 95% humidity it loses up to 75% of its strength, which leads to collapsing stacks.
Practical steps:
- use dry pallets and dunnage
- do not stuff in rain or fog without cover
- use desiccants for steel, machinery and electronics, combined with vapour-tight wrapping
- cover sensitive cargo with fleece to catch drips
VGM: Verified Gross Mass
Since 1 July 2016, the SOLAS Convention requires that the gross mass of every packed export container is verified before it is loaded onto a ship. Without a VGM, the container is not loaded. The IMO guidelines are in MSC.1/Circ.1475.
The VGM is the total weight of the packed container: the container’s tare weight plus cargo, packaging, pallets, dunnage and securing material.
Method 1 and Method 2
| Method 1 | Method 2 | |
|---|---|---|
| How | Weigh the packed and sealed container | Weigh all cargo items, pallets, dunnage and securing material and add the container’s tare weight |
| Equipment | Calibrated and certified weighbridge or lifting equipment | Calibrated scales for the individual items and a certified calculation method |
| Suitable for | All cargo | Packaged goods. Not for bulk cargo such as scrap metal or unbagged grain |
| Note | If weighed on a truck, deduct the truck and trailer tare from registration documents and the fuel. Two containers on one truck must be weighed separately | Sealed original packages with their accurate weight permanently marked do not need to be weighed again |
The container’s tare weight is marked on the container, usually on the doors.
Who is responsible
The shipper is responsible for the VGM. Under the IMO guidelines, the shipper is the party named as shipper on the bill of lading or sea waybill. It can also be the party that concluded the contract of carriage with the shipping line. If a warehouse or forwarder stuffs the container for you, they should give you the weights, but the responsibility stays with the shipper.
The VGM must be signed by an authorised person (an electronic signature or the name in capitals is accepted) and sent to the shipping line in time for its cut-off. If the terminal weighs the container and its result differs from your VGM, the terminal’s weight prevails. A container that exceeds the maximum gross mass on its CSC plate may not be loaded.
VGM in Belgium and the Netherlands
| Belgium | Netherlands | |
|---|---|---|
| Authority | FPS Mobility and Transport, Directorate-General Shipping | Human Environment and Transport Inspectorate (ILT) |
| Legal basis | Royal Decree of 25 September 2016 | Regeling veiligheid zeeschepen, articles 44a and 44b |
| Method 2 certification | Considered certified if the calculation is part of your ISO certification (e.g. ISO 9001) or your AEO certification. A third route is approval by DG Shipping on request | Calculation must follow MSC.1/Circ.1475 using a certified method |
| Weighing equipment | Certified under Belgian metrology rules (FPS Economy) | Calibrated and certified weighing equipment |
| Tolerance | No fixed legal tolerance published. If a control weighing is more than 5% above the declared VGM, the VGM is corrected and the shipper may be investigated and fined | Maximum deviation from the actual mass: 500 kg for containers under 10 t, 5% for containers of 10 t or more |
In Belgium, containers on a trailer or chassis driven onto a ro-ro ship on a short international voyage are exempt. This can matter for trailer traffic to the UK. Contact for VGM questions in Belgium: vgm@mobilit.fgov.be.
Worked example: Method 2
A hypothetical shipment from Antwerp: 22 Euro pallets in a 40’ container.
| Item | Weight |
|---|---|
| Goods including packaging, 22 pallets x 520 kg (weighed on a calibrated scale) | 11,440 kg |
| Euro pallets, 22 x 25 kg (use your own weighed figure) | 550 kg |
| Airbags, straps and timber | 60 kg |
| Container tare (as marked on the door) | 3,750 kg |
| VGM | 15,800 kg |
For a container of this weight, the Dutch rule allows the VGM to deviate from the actual mass by up to 5%, roughly 790 kg. That margin is for enforcement. It is not a reason to estimate.
Road load securing in Belgium and the Netherlands
The first and last leg of most sea shipments is a truck. Since 20 May 2018, Directive 2014/47/EU has allowed roadside inspectors across the EU to check cargo securing. The directive’s Annex III sets the same forces as above (0.8 g forward, 0.5 g sideways and backwards) and refers to standards such as EN 12195-1 for calculating lashing forces, EN 12640 for lashing points and EN 12642 for the strength of the vehicle body. Inspectors classify deficiencies as minor, major or dangerous. With major or dangerous deficiencies, the vehicle can be stopped until the load is secured.
Netherlands: article 5.18.6 of the Regeling voertuigen requires that the load cannot fall off or affect the vehicle’s stability in normal traffic, including full braking and sudden evasive manoeuvres. It must withstand at least 0.8 times its weight forward, 0.5 times sideways (0.6 times if the load can tip) and 0.5 times backwards.
Belgium: load securing for heavy goods vehicles is regulated in article 45bis of the Highway Code (Wegcode / Code de la route). Since the sixth state reform, the regions are responsible for load securing. Flanders aligned its rules with Directive 2014/47/EU in 2017 and applies administrative fines of EUR 75, EUR 350 or EUR 1,000 depending on how serious the infringement is.
A container that is well stuffed for the sea voyage is usually also secure for the road. The reverse is not always true: a trailer load secured only by top-over lashings may need extra blocking for a container.
The rules at a glance
| Framework | What it covers | Status |
|---|---|---|
| IMO/ILO/UNECE CTU Code (MSC.1/Circ.1497, 2014) | Packing and securing of containers, trailers, swap bodies | Code of practice, not mandatory. A revised edition is being finalised. The 2014 edition is the published reference at the time of writing |
| SOLAS chapter VI, regulation 2 and MSC.1/Circ.1475 | Verified Gross Mass | Mandatory since 1 July 2016 |
| ISPM 15 and Regulation (EU) 2016/2031 | Treatment and marking of wood packaging | Mandatory for wood packaging entering the EU from non-EU countries |
| EPAL Technical Regulations | Euro pallet production, repair, exchange | Private standard of the EPAL pool |
| ISO 6780:2003 | Pallet footprints | International standard |
| EN 12195-1:2010 | Calculation of securing forces on road vehicles | European standard, referenced in Directive 2014/47/EU |
| Directive 2014/47/EU | Roadside inspection of cargo securing | Applies since 20 May 2018 |
| Regeling voertuigen art. 5.18.6 (NL), Highway Code art. 45bis (BE) | National road load securing | In force |
Checklists
Before stuffing
- Check the CSC safety approval plate on the door: the maximum gross mass plus a next examination date or ACEP mark that is still valid. No plate means the container must not be used internationally.
- Walk around the container: no holes, no serious dents, doors open, close and seal properly, door gaskets intact.
- Inside: dry, clean, no smell, no protruding nails, no stains that come off on a glove. Close the doors from inside and look for light coming through holes.
- Check the lashing points and the floor.
- Plan the load: total weight against the container’s payload, position of heavy pieces, centre of gravity, concentrated loads.
- Make sure pallets and dunnage are ISPM 15 marked if they leave the EU.
- Prepare enough securing material: dunnage, airbags, straps, friction mats, desiccants.
During stuffing
- Heaviest items first, on the floor, spread over the length. Lighter cargo on top.
- Keep the centre of gravity near the middle: no more than 60% of the cargo weight in either half of the length.
- Load tight against the front wall and side walls. Fill gaps with dunnage or airbags.
- Respect stacking limits: “this way up”, fragile marks and the 5,500 kg limit for the bottom Euro pallet.
- Put heavy pieces on load-spreading beams where their footprint is small.
- Keep liquids below dry goods and away from sensitive cargo.
- Record what goes in: number of pallets, weights, positions.
Before you close the doors
- Block the last row: timber gate, strap system or airbags against cargo, never against the doors.
- Place desiccants if needed. Remove old labels from the outside.
- Take photos of the load at the door and of the empty container.
- Calculate or weigh the VGM and send it signed to the shipping line before its cut-off.
- Close, seal and record the seal number on the documents.
Common mistakes that lead to damage or rejected containers
- No VGM or VGM sent too late. The container stays at the terminal and misses the vessel. Storage and rebooking costs follow.
- Guessing instead of weighing. The Dutch rules allow a deviation of no more than 500 kg or 5%. In Belgium, a control weighing more than 5% above your VGM triggers an investigation.
- All the weight at one end. The container tilts when the spreader lifts it. The CTU Code asks terminals to check this during lifting and have it corrected.
- A heavy machine on a short footprint without load-spreading beams. The floor can break, the carrier can refuse the box.
- Gaps between pallets. Cargo shifts at sea and pallets break. A void of a few centimetres is enough.
- Cargo leaning against the doors. Risk for the person opening the container and damage to the cargo.
- Untreated or unmarked wood. Pallets or dunnage without the ISPM 15 mark can stop an import into the EU or an export at destination.
- Wet pallets and cardboard. Leads to container rain, mould and collapsed cartons.
- Using non-EPAL or damaged pallets in an exchange system. They are not exchangeable in the EPAL pool, so you may not get pallets back.
- Exceeding the payload on the CSC plate. The container is not loaded, whatever your VGM says.
How Destinex can help
Destinex is a freight forwarder based in Antwerp. We arrange sea freight via Antwerp and Rotterdam, road freight across Europe, customs clearance and warehousing. You have one personal contact for your shipment, reachable 24/7, who keeps you informed. If you are unsure about pallet choice, weight distribution or your VGM, contact us before you load.
Last updated 22 October 2026